|
Automatic Film Lamination Machine Model JAZZ Water Based Adhesive, Single Side Sheet to Reel Cold Lamination for BOPP Films-Matt, Gloss or Metallized.
Features
- Water Based, Single Side Sheet to Reel Cold Lamination.
- Films-Matt, Gloss or Metallized BOPP.
- Integrated feeder which can take stock from 120-450gsm.
- Sheets are fed on a vacuum bed with wide belts for precise underlap accuracy.
- Two laminating rollers-one hard chrome steel roller and second rubber roller are pneumatically controlled at the nip.
- Adhesive is pneumatically controlled and precisely dispensed by pneumatic pump, which ensures neat operation.
- The roll of film is mounted on quick-change airshaft with film tension controlled by a pneumatic brake.
- Film roll has a trim slitter and perforating mechanism.
- Laminated sheets are perfectly rewinded with separate drive on a specially devised roller, resulting in no wrinkles, ability to rewind large diameter rolls as per feeding stack and easily transferable to sheet separator.
- Entire process of feeding, laminating and rewinding as per increasing speed levels are synchronized and ensures non-stop laminating.
- Modular design machine, which can be run in conjunction with Sheet Separator machine essential for separating laminated sheets.
- The rewinded laminated sheets on roller are directly fed on separator.
- The in-feed nip rollers are pneumatically adjustable.
- The separated sheets are properly collected on a stacker.
Technical Details
- Maximum Sheet Size: 1040mm L x 780mm W (40"x30")
- 780mm L x 1040mm W (30"x40")
- Minimum Sheet Size: 432mm L x 360mm W (17"x14")
- 360mm L x 432mm W (14" x 17")
- Stock Range: 120 gsm to 450 gsm
- Speed: 0-70 Meters Per minute.**
- Power Requirements: 9Kw
Sheet Separator Unit
- Power Requirements: 1.5 Kw
**Depends upon material thickness, properties and operating conditions. Option
Model JAZZ-CT for water based adhesive and thermal lamination.
|
